Are you on the lookout for a tool which is capable of machining surfaces? Then the ideal answer in your case is a slotting machine. This is a machine which falls in the category of machine tools. It is the example of a reciprocating machine. The working principle of this machine is quite interesting. However, an individual is required to have skills before he can start using them. In many ways, it bears a close resemblance with a shaper.
Looking at the principles
The principles of operations of both the shaper and the slotting machine are similar. However, a difference exists in the way the ram reciprocates the cutting tool. In the shaper, the ram is involved in the forward and backward movement in a straight line whereas in a slotter the movement is in the vertical axis. Both of them being single point tools they are available for cutting on straight lines. Slotter machine or shaper otherwise has a lot of similarities from the aspects of usage and construction.
Diverse uses of the equipment
If you want to get hold of a machine which can cut both internal and external gears effortlessly, then your answer lies with a slotter. The shaper and the slotter make the same kind of cuts. However, the shaper is capable of tackling a small amount of work. On the other hand, the latter can handle a substantially larger workpiece and that too it can cope with regular as well as irregular surfaces. The tool is utilized for cutting grooves and for making various keyways.
Puncher slotters
This machine has substantial weight and is equipped with a strong motor. The length of the stroke is significantly larger. From forgings and castings, this machine has the ability to remove a higher amount of metal. The stroke length generally varies within the range of two thousand to eighteen hundred meters.
Precision slotters
In comparison to the machine as mentioned earlier, this one is much lighter. They have the ability to work at a relatively higher speed. Their speciality is making lighter cuts with accurate finishing. With the assistance of special jigs, the machine can tackle many tasks on the line of production.
Diverse segments
The various segments are the bed, saddle, cross slides, feed mechanism, tool head, column and rotating table. The rigid bed or base holds the entire load of the machine. The top of the bed is done accurately because they provide the guidelines where the saddle is to be mounted. Manual control may be used for moving the saddle from the column. Cross slides are mounted on the saddle’s guideways and may be moved towards the right direction parallel to the face of the column.
Think sensibly
It is smart to research extensively on the online platform for contacting the leading names of companies involved in the manufacturing of machine tools. They should make use of advanced technology for the production of premium quality products. Make sure that the supplier is well-reputed in the industry. They should give topmost priority on customer satisfaction.